Solarix PI 550
Descripción
In developing the Solarix PI sine wave inverter, Steca has brought about some innovations which are unprecedented in this form. These are, above all, parallel connection, the novel operating concept which uses a single rotary switch, direct communication in order to calculate the state of charge (SOC) with Steca Tarom and Steca Power Tarom, and the electronic fuse. Furthermore, our many years of experience have come into play for deploying these inverters specifically in photovoltaic systems. This comes through, for instance, in the way that a most diverse range of appliances is provided with a low operating consumption and a stable energy supply.
Especificaciones técnicas
| Product No. | I1202 |
| Inverter type | PI 550 |
| Number of inverters | 1 / 0 |
| Characterisation of the operating performance: | |
| System voltage | 12 V |
| Continuous power | 450 VA |
| Power 30 min. | 550 VA |
| Power 100 sec. | 700 VA |
| Power 5 sec. | 1,500 VA |
| Power asymmetric | 350 VA |
| Max. efficiency | 93 % |
| Own consumption standby / ON | 0.5 W / 6 W |
| DC input side: | |
| Battery voltage | 10.5 V … 16 V |
| Reconnection voltage (LVR) | 12.5 V |
| Deep discharge protection (LVD)* | 10.5 V |
| AC output side: | |
| Output voltage | 230 V AC +/-10 % |
| Output frequency | 50 Hz |
| Load detection (standby) | adjustable: 2 W … 50 W |
| Safety: | |
| Protection class | II (double insulated) |
| Electrical protection | reverse polarity battery, reverse polarity AC, over voltage, over current, over temperature |
| Operating conditions: | |
| Ambient temperature | -20 °C … +50 °C |
| Fitting and construction: | |
| Cable length battery / AC | 1.5 m / 1.5 m |
| Cable cross-section battery / AC | 16 mm² / 1.5 mm² |
| Degree of protection | IP 20 |
| Dimensions (X x Y x Z) | 212 x 395 x 130 mm** |
| Weight | 6.6 kg** |
* Data communication with Steca Power Tarom in dependence of Steca Power Tarom SOC
** per inverter